Vega Systems IncRedundancyMigration

Synchronize Device Output

Precision Synchronization for Output Settings

About

Use this option to synchronize Speaker settings between the Primary and Redundant sites.

Scope

The scope is limited to RMF-licensed devices selected by the Device Selection block and to the features listed under the "Settings here correspond to" section in the picture below. The direction of synchronization depends on the direction setting. See Set Synchronization Direction. If no devices are selected in the Device Selection block, this option is disabled.

View Output Settings—Site Navigation Pane

Enable

To enable and synchronize the device output settings, perform the following steps:

  1. Click Output.

Note: For the Output block to be clickable, at least one device must be selected from the

Devices section. For more information, refer to Device Selection

Output Option

  1. Enable the Overall Output Settings Sync to enable all the individual device output settings. Enable/Disable different sub-settings as needed.

Output Settings Screen
Synchronize the Required Output Settings

  1. To retain the settings, click the Check Mark button.

Check Mark Button

  1. Click Save in the Milestone toolbar to save the changes.

Save Icon—Milestone Toolbar

Disable

To disable and synchronize the device output settings, perform the following steps:

  1. Click Output.

Note: For the Output block to be clickable, at least one device must be selected from the

Devices section. For more information, refer to Device Selection

Output Option

  1. Enable the Overall Output Settings Sync to enable all the individual device output

    settings. Enable/Disable different sub-settings as needed.

Output Settings Disabled

  1. Click Save in the Milestone toolbar to save the changes.

Save Icon—Milestone Toolbar

Step Result: The Output settings option is disabled.

Disabled Output Settings Option
PreviousSynchronize Device InputNextSynchronize Metadata